Sunday, August 8, 2010

Re: [MW:6378] SAW WELDING

Hi!
Yes ! you can , but use backing strips .

Rgds
VG

On Sun, Aug 8, 2010 at 6:54 PM, Eng/ Mostafa Kamel Hussein <mkh_200@yahoo.com> wrote:
Can i make single pass full penetration with SAW without GMAW back weld in circumferential welds in tank with 6mm in thickness and the groove is square with 1mm gab??? 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...