Saturday, July 31, 2010

Re: [MW:6226] vacuum chamber

dear sir,plz elaborate ur requirements for 10-6 mbar.

On 7/31/10, Devang Patel <devangp@inoxindia.com> wrote:
> Does anybody have a technical information about Vacuum Chamber(1x10-6 mbar)?
>
> Regards,
> Devang Patel | Sr. Manager Engineering
> Inox India Ltd. | 4th Floor, ABS Tower, Old Padra Road, Vadodara. Guj.
> India.
> Voice: + 91-265-3056100 ext. 392 | Fax: +91-265-2341449 | Mobile: +91
> 9879803401
> Email: devangp@inoxindia.com | web: www.inoxindia.com
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>


--
K Harish Kumar, MTech
Consultant for:
Corrosion Metallurgy
Failure Analysis Surface Coating
Thin Films Vacuum Systems QMS.

www.itindt.com

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...