Thursday, July 29, 2010

RE: [MW:6189] Test for PQR of Super Duplex Stainless steel plate UNS32750

In addition to what has been stated we also did hardness tests across
base metal HAZ and weld metal. Ferrite tests are also good to have.

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Harish
Kannepalli
Sent: Thursday, July 29, 2010 9:52 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:6188] Test for PQR of Super Duplex Stainless steel
plate UNS32750

dear yusuf, as per asme sec ix,2tensile,2facebend,2rootbend are
mandatory.u may have macro also.

On 7/29/10, yusufkhan pathan <yusufkhanp97@gmail.com> wrote:
> Dear all,
>
> I have to prepare a PQR with GTAW+SMAW for Super duplex SS Plate of
> UNS 32750 of thickness 8mm.
> Please suggest me the type and references of test to be conducted for
> the specimen as per ASME SecIX.
>
> Thanks in advance.
>
> Regards.
> Yusufkhan
> +91-9916008202
>
> --
> To post to this group, send email to
materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views
and
> meant for educational purposes only, Users must take their own
decisions
> w.r.t. applicable code/standard/contract documents.
>


--
K Harish Kumar, MTech
Consultant for:
Corrosion Metallurgy
Failure Analysis Surface Coating
Thin Films Vacuum Systems QMS.

www.itindt.com

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views
and meant for educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...