Saturday, July 17, 2010

Re: [MW:5999] PSL 1 and PSL 2

Dear Friend

The attached file might be useful as description of other members.

Best regards,
Keyvan

On Fri, Jul 16, 2010 at 10:20 AM, Bagesh <bagesh.kmr@gmail.com> wrote:

API 5L, Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the Petroleum and natural gas industries.

 

Level PSL 1 provides a standard quality level for line pipe.

Level PSL 2 has additional mandatory requirements for chemical composition, notch toughness and strength properties and additional NDE.

Requirements that apply to only PSL 1 or to only PSL 2 are so designated.

Requirements that are not designated to a specific PSL designation apply to both PSL 1 and PSL 2.

The pipe grade for PSL 1 pipe is identical to the steel grade (designated by a steel name). It consists of an alpha or alphanumeric designation that identifies the strength level of the pipe and is linked to the chemical composition of the steel

The pipe grade for PSL 2 pipe shall be as given in Table 1 and consists of an alpha or alphanumeric designation that identifies the strength level of the pipe. The steel name (designating a steel grade), linked to

the chemical composition of the steel, additionally includes a suffix that consists of a single letter (R, N, Q or M) that identifies the delivery condition

 
 ===================
 Bagesh Kumar
===================

 


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of mohammed helal
Sent: Friday, July 16, 2010 3:27 PM

Subject: Re: [MW:5995] PSL 1 and PSL 2

 

The different  in the psl1 that   the requirement is only minimum for all the specifications like tensile strength and yield strength and the percentage of element in the product like carbon , magnesium and sulfur.... but in the PAL2 the requirement  is a minimum and maximum.

Eng.MOHAMMED ABD EL-AZIM HILAL

        MECHANICAL ENGINEER

     CSWIP 3.1 - NDT (RT- MT - PT)

OTISHAN CONSULTANT ENGINEER

 00966-502612218  -  0020103124557



--- On Fri, 7/16/10, HarikrishnanS@punjlloyd.com <HarikrishnanS@punjlloyd.com> wrote:


From: HarikrishnanS@punjlloyd.com <HarikrishnanS@punjlloyd.com>
Subject: [MW:5994] PSL 1 and PSL 2
To: materials-welding@googlegroups.com
Date: Friday, July 16, 2010, 9:02 AM


Dear All

Can you tell the difference between PSL 1 and PSL 2 specification levels as per API 5L.

Thanks and Regards

Harikrishnan N S
QA/QC Engineer
Punj Lloyd Ltd
Mob.No. : +91 9769305625

They can, because they think they can.......



---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


This e-mail and any files transmitted with it are for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient of this communication, we request you to notify the sender immediately by return email and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email is strictly prohibited. The recipient acknowledges that Punj Lloyd Limited or its subsidiaries and associated companies (collectively "Punj Lloyd Group") are unable to exercise control or ensure or guarantee the integrity of/over the contents of the information contained in e-mail transmissions and further acknowledges that any view, opinion or advice expressed in this message are those of the individual sender and no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of Punj Lloyd Group. Although we have taken all reasonable precautions to ensure that this communication is free from viruses. We do not assume responsibility for any loss or damage arising from the use of this email.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...