Sunday, July 4, 2010

Re: [MW:5844] M fluid & D fluid

HI.

300.2 Definitions

(a) Category D Fluid Service: a fluid service in which all the following apply:

(1) the fluid handled is nonflammable, nontoxic, and not damaging to human tissues as defined in para. 300.2

(2) the design gage pressure does not exceed 1035 kPa (150 psi)

(3) the design temperature is from −29°C (−20°F) through 186°C (366°F)

(b) Category M Fluid Service: a fluid service in which the potential for personnel exposure is judged to be

significant and in which a single exposure to a very small quantity of a toxic fluid, caused by leakage, can

produce serious irreversible harm to persons on breathing or bodily contact, even when prompt restorative

measures are taken

 

bEST rEGARDS

AGUSTIN




De: Srinivas Engr <srinivas.gmsrini@gmail.com>
Para: Materials & Welding <materials-welding@googlegroups.com>
Enviado: sáb, julio 3, 2010 6:05:31 AM
Asunto: [MW:5840] M fluid & D fluid

Dear all

What is called M fluid & D fluid in ASME B31.3 ?

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...