Saturday, July 3, 2010

RE: [MW:5841] hydro test

 
Gentlemen,
 
You don't need to maintain the test pressure , ONE of the things which has to be recorded during the holding time is pressure variations as a result of temperature variations by using the pressure and temp recorders and in no case this will exceed the sp. m. yield strenght of the pipe.
 
Thank You,
 
Sohaib Tareq

--- On Tue, 6/29/10, Muhammad Ali <mali5286@hotmail.com> wrote:

From: Muhammad Ali <mali5286@hotmail.com>
Subject: RE: [MW:5786] hydro test
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Date: Tuesday, June 29, 2010, 12:57 PM

Dear Mr. Selvan,
 
Such a condition does occur when there are temperature variations in the environment. Esp. when you talk of holding the pressure for 6 hours, atmospheric temperature rise leads to expansion of trapped hydro inside the system that would account for the pressure to increase.
We have piping being hydrostatically tested for 24 hours and pressure rise and falls follow a sinusoidal.
 
Regards,

Muhammad Ali

 


 

Date: Tue, 29 Jun 2010 09:18:47 +0000
To: materials-welding@googlegroups.com
Subject: [MW:5782] hydro test
From: centh@rediffmail.com

dear,


please any body explain me. my test pressure is 100bar and holding
time is 6hours.when he do the test, the pressure and temperature is
increase,our supervisor reduce the pressure and maintain the same 100bar
it is correct or what.please tell me.this is station manifold.

regards,
a.s.selvan

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.


Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...