Wednesday, July 14, 2010

Re: [MW:0] RE: 5960] ASME AUDIT

review requirements ppt attached.

arunachalam
Abu dhabi

On Tue, Jul 13, 2010 at 8:32 PM, Potter, Richard <RPotter@itses.com> wrote:

On the inter-net go to ASME dot. Org

Here you can pull up the two most important documents you would need.

" Joint Review Guide"

"Guide for ASME Review Teams", For "Review of Applicants" For "ASME Certificates of Authorization"

The latter is a basic check list for the required documentation needed for the review and the reference location within your ASME Quality Manual.

 


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of James cyrilandrew
Sent: Tuesday, July 13, 2010 10:54 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:5974] RE: 5960] ASME AUDIT

 

 

Dear David Chan,

               We have already applied for renewal and commerical aspects we aere prepared like NDE level III and AI appointment...... but i am in need of technical aspects. how to work for it. what r all the documents to be prepared and how train up the other supporting departments.
--

Regards,

J.C.Andrews

QA/QC Engineer

Doha-Qatar.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.




--

Regards,

J.C.Andrews

QA/QC Engineer

Doha-Qatar.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
அருணாசலம்
கலைவாணி
சுதர்ஷனா
வருண்


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...