Thursday, July 22, 2010

[MW:6079] Welding of ASTM A 335Gr.P11

Can we use E-7018B2 instead of E-8018B2 for welding of A-335 Gr. P11
material. If yes then what care shall be exercised during welding?
Would the resulting weldment be of adequate strength?


Thanks and Regards

Limesh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...