Thursday, July 1, 2010

[MW:5812] Calibration

Dear Team members

Kindly advise on following querries

·         Calibration of   Portable ovens and welding machines to traceable standards

·         Adequcy of one thermo couple to holding oven which is constantly kept at 100 deg C  after initial redrying

Presently we are doing the Calibration of   Portable ovens and welding machines by our own developed procedure using digital clamp meter ( used as a master, and this master is traceable to national and international standard)

Thanks & Regards

Prashanth Hegde

CICB-Chemicon

Mangalore



Please don't print this e-mail unless you really need to.
*******************************************************************
This e-mail is confidential. It may also be legally privileged. If you are not the addressee you may not copy, forward, disclose or use any part of it. If you have received this message in error, please delete it and all copies from your system and notify the sender immediately by return e-mail. Internet communications cannot be guaranteed to be timely, secure, error or virus-free. The sender does not accept liability for any errors or omissions.
*******************************************************************
"SAVE PAPER - THINK BEFORE YOU PRINT!"

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...