Friday, June 25, 2010

Re: [MW:5735] QW 2004.b - PQR Qualification

yes, you can, QW 204.b will not be applicable in your case.

On Fri, Jun 25, 2010 at 6:54 AM, Stephen Milne <sim@aalborg-industries.com.au> wrote:

Hi,

 

Regarding ASME IX  section QW-200.4(b) and reference to minimum 13mm is this relevant to our case as although we are combining two processes we are not combining two PQR's or procedures. We are using GTAW & MMAW on a single WPS but do not separate the two and only have the one welder completing both processes off the WPS. We selected 150NB STD ASTM A 106 GB pipe with a wall thickness of 7.11 as the coupon for WPS & PQR qualification as this is the maximum size pipe we utilise and the WPS therefore qualifies 1.6mm to 14.22mm. Just like to confirm this coupon size is in accordance with the code.

 

Many Thanks

 

Stephen



--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...