Tuesday, June 22, 2010

Re: [MW:5710] CSWIP3.1 Model question

I would say it's better to take the course, as it will be the basis of the examination questions
 
Good luck
 


 
On Mon, Jun 21, 2010 at 11:06 AM, Sandeep Kp <sandeepkp99@yahoo.com> wrote:
Dear All,
I am going to conduct CSWIP 3.1 Examination on coming 05-july-10.
Any body have latest(2010) model questions of the same? or can advice any web sites.
 
 
 
Thanks,
 
Sandeep.k.p

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...