Sunday, June 20, 2010

Re: [MW:5666] Paint for Aluminum Heat Exchangers

Dear Amit,

You can go for Belzona Application.

This may suits your requirement. Kindly send us the temperature, medium of fluid and etc.,

We can guide you.

Regards,
Vijay

On Sun, Jun 20, 2010 at 7:50 AM, AGUSTIN JIMENEZ <agumarca@yahoo.com> wrote:
Hi.
Is recommendable not paint, if you paint you will have problem with temperature interchange.
 
AGUSTIN JIMENEZ


De: "amitrunsworld@gmail.com" <amitrunsworld@gmail.com>
Para: Materials & Welding <materials-welding@googlegroups.com>
Enviado: vie, junio 18, 2010 1:09:21 PM
Asunto: [MW:5651] Paint for Aluminum Heat Exchangers

Dear Group Members,

Could you please guides which type of paint we can use for general
application for corrosion protection purpose for aluminum heat
exchanger used as an Engine Radiator, Transformer oil cooler, Oil
coolers for locomotives working temperature up to 150C.



Thank you
Amit

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...