Re: [MW:5388] IQI set selection

Hi,

     Refer Table T-276 of ASME Sec-V to identify the Hole and Wire type IQI.

Also you can calculate the Thickness of wire by the following formula.

% IQI Sensitivity =  Thickness of the thinnest wire visible

                            ------------------------------------------------------ * 100

                              Object Thickness 

Regards,

Vaithiyanathan,

QA Engineer,

Worleyparsons Arabian Industries 

Oman.

On Mon, May 31, 2010 at 2:57 PM, Subrata Das <sdas@pkgroup.org> wrote:

Dear All

My job is Carbon steel and thickness is 20 mm. For radiography I have to select the IQI set as material group as "1" and wire type set as "A or B or C or D". Can you please guide me how to select the set identification number based on thickness of job.

 

Thanks in advance

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
With Best Regards

B.Vaithiyanathan

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.