Wednesday, June 2, 2010

Re: [MW:5341] Presure Gauge Limits

Hi.Senthilkumar
Is good 4000 psi, the pressure test is better that is in minimun 30% and maximun 70% gauge range.
 
Agustin Jimenez


De: "raghurambathula@gmail.com" <raghurambathula@gmail.com>
Para: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Enviado: mar, junio 1, 2010 10:13:08 AM
Asunto: RE: [MW:5334] Presure Gauge Limits



Sent from my Nokia phone
-----Original Message-----
From: SENTHILKUMAR SWAMINATHAN
Sent:  01/06/2010 2:52:07 pm
Subject:  [MW:5332] Presure Gauge Limits

Dear All,
 
One of the fire water line to be hydrotest in 3000 ksi, with me available gauge is 4000ksi.
 
Is there any documents says we can use this limit gauge for testing or shall be tested only with min 6000ksi gauge only?
 
Regards,
S.Senthilkumar
Angola

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

 

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...