Monday, June 21, 2010

[MW:5684] stroge tank API 650

Dear all,
can any one explain storage tank bottom plate thermal distoration due to welding as per API 650 how we get the tolernce of expect peaking, banding,plumpness,and other.only bottom plate waveness tolerence not shown extally.

 
 
 

Thanks and Best Regards,

 Balakrishnan Ramesh

QA/QC Dept

QA/QC Inspector.Tanks/Silos

Daelim Saudi Arabia Co.Ltd

Value Creating Global Plant Builder

 SAUDI KAYAN HDPE PROJECT

8 ram2ram_2000@yahoo.com

      jayak@daelim.co.kr

 (KSA #-+966530647157

 

 
 
 
 


--- On Mon, 6/21/10, KASHKOUSHA <kashkousha1@yahoo.com> wrote:

From: KASHKOUSHA <kashkousha1@yahoo.com>
Subject: Re: [MW:5682] weld SA-106 to 9 Cr materials P No 5B gr 1 or gr 2
To: materials-welding@googlegroups.com
Date: Monday, June 21, 2010, 12:45 PM

dear ahmed
yes,by using ER 90S-B9(GTAW)&E9018-B9 (SMAW) or E 9015-B9
the joint should be heat treated acc .to ASME B31.3

 
H.KASHKOUSHA



From: Ahmed Hafez <diesel2002@hotmail.com>
To: Welding Material <materials-welding@googlegroups.com>
Sent: Mon, June 21, 2010 1:42:17 PM
Subject: [MW:5681] weld SA-106 to 9 Cr materials P No 5B gr 1 or gr 2

good morning every one
is it applicable to weld SA-106 to 9 Cr materials P No 5B gr 1 or gr 2
 
thanks and best regard


Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...