Difinitely if these pipes are closed in both ends, When it is dipped in the pot, the air inside should escape or the pipe will distort.
From: Vijay <k.vijayaraj@gmail.com>
To: Materials & Welding <materials-welding@googlegroups.com>
Sent: Sun, 9 May, 2010 9:46:28 PM
Subject: [MW:5121] Galvanizing oh Handrail
Dear All,
We are fabricating handrails for our client. That to be galvanized
externally. I heard that proper holes to be provided on the handrail
for vent to dip the handrail while doing dipping. Is it is necessary?
Kindly guide me on this.
Regards,
Vijay.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment