Air Receivers are not normally painted or coated internally for two main
reasons:
1- Air is not corrosive even in harsh environment and the moist accumulated
in humid areas is drained periodically not to build up inside the vessel.
2- If internally coated the coat may get pilled off and carried into
instrument and cause their malfunction.
Regards
pankaj abhang
<pankaj.abhang1@g
mail.com> To
Sent by: materials-welding@googlegroups.com
materials-welding cc
@googlegroups.com
Subject
[MW:5079] corrosion resistant
05/05/2010 03:03 plating
PM
Please respond to
materials-welding
@googlegroups.com
Dear all
I am having a vessel of CS i want to give corrosion resistant coating from
inside any body will tell me the procedure such as paint, powder,or by
electro plating method.The vessel is of Air reciver vessel constructed as
per ASME. The coating to be done from inside to avoid corrosion.
The size of vessel is Dia-1100, Length-2400 mm.
MOC- SA516 GR. 70
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.
Save a tree...please don't print this e-mail unless you really need to.
Save a tree...please don't print this e-mail unless you really need to.
This email and any attached files ("Message") may contain confidential and/or privileged information. It is intended solely for the addressee(s). If you receive this Message in error, inform the sender by reply email, delete the Message and destroy any printed copy.
Any unauthorized use, distribution, or copying of this Message or any part thereof is prohibited. Emails are susceptible to alteration. Neither Technip nor any of its affiliates shall be liable for the Message if altered or falsified nor shall they be liable for any damage caused by any virus that might be transmitted with this Message.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment