Orifice Flanges are always 300LBS and above. Dimensions similarity of B16.36 to B16.5 is as under(i.e.for the sizes indicated,the dimensions of 16.36 & 16.5 are same):
300LBS-8" thro 24"(extreme sizes included)
400LBS-4" thro 24"(extreme sizes included)
600LBS-4" thro 24"(extreme sizes included)
900LBS-3" thro 12"(extreme sizes included)
1500LBS-2" thro 12"(extreme sizes included)
2500LBS-1.1/2" thro 12"(extreme sizes included)
For sizes other than above,B16.36 is to be followed for dimensions of orifice flanges
Regards
Aarpee
On Tue, May 4, 2010 at 9:44 PM, omar fazni <ofazni@yahoo.com> wrote:
--Dear Members,
Kindly please explain what ANSI Code should be used as referral in the Mill Cert's for Orifice Flanges?
An example, We found an Orifice Flange having pressure rating of #150.
If we refer to ANSI B16.36, it only explains for Orifice Flange of more than #300...........while the Mill Certs refers to B16.5 and not to B16.36
Does it mean that the material is not complying to the code?? are there any explanations for the #150 Orifice??....
Thank you & Regards
Ofazni
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment