ASME B31.3 Appendix M "Guide to Classifying Fluid Services" . There is an excellent flow chart designed expressly for this purpose. Figure M300.
hi
1-service condition
2-type of material
3-design (joint efficiency )H.KASHKOUSHA
From: dhinesh gnanadhas <dhineshlhmm@gmail.com>
To: Materials & Welding <materials-welding@googlegroups.com>
Sent: Tue, May 4, 2010 8:35:02 AM
Subject: [MW:5050] Piping Category
Hi
Based on Which criteria the Piping services are being categorised as
Category 'D', 'M', Normal & Sevier Cyclic fluid?
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment