Tuesday, May 4, 2010

Re: [MW:5054] jetty pipeline RT inspection requirments

Hi.....yes the code is Asme B31.4/ .....some of our friend confirm that they used 10% RT for hydrocabons product and no test for waste water, fresh water ...
 
thanks
 
regards

On Tue, May 4, 2010 at 7:14 AM, B.Vaithiyanathan <pavainathan@gmail.com> wrote:
Hi,
       Let me know your design code whether ASME B 31.4/31.8 then only you can decide on extent of NDT.Since it's a modification work you can check with your client what was the design of code of existing line.
 
 
Regards,
Vaithiyanthan
QA Engineer,
WorleyParsons-Arabian industries
Oman

On Mon, May 3, 2010 at 4:39 PM, daniel iordache <daniel.iordache@gmail.com> wrote:
Hello,
 
Our client asked for a modification and implemetation for 4 new pipeline that will transfer products( goasoil, water, waste water) over the jetty to barge.....
 
Anyone that have a previous project like that can help me with procentage of inspection especiially for RT test ....?
 
regards
 


--
Daniel Iordache
Bureau Veritas - Angola
Mechanical& Welding Surveyor
Mobile Ao: +244921544583
Mobile Ro:   +40721731728
E-Mail:daniel.iordache@ao.bureauveritas.com
      daniel.iordache@gmail.com
         

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
With Best Regards

B.Vaithiyanathan

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
Daniel Iordache
Bureau Veritas - Angola
Mechanical& Welding Surveyor
Mobile Ao: +244921544583
Mobile Ro:   +40721731728
E-Mail:daniel.iordache@ao.bureauveritas.com
      daniel.iordache@gmail.com
         

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

1 comment:

Unknown said...

Hi,
Refer ASME B 31.8 Para 826 & 840.22
you will get the requirement of NDT extent.

Vaithiyanathan

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...