Friday, May 14, 2010

RE: [MW:0] welding Repair percentage

I have used the following

% Repair = 100*(Cummative length of weld repairs)/(Cummative Total length
of weld)

I Generated a Large excel Spread sheet to monitor and record data. Sorted
by weld type and my welder. I had the NDE inspector input the dta each
shift so i had a fairly realtime update. (A lot of time was spent
developing the system and training all how to use it, but it wqas worth it
in the end).

Best Regards,

Richard M. Beldyk, PhD, PE
AWS CWEng
ASQ CSSBB

Original Message:
-----------------
From: mohamed soliman msoliman79@yahoo.com
Date: Fri, 14 May 2010 03:04:59 -0700 (PDT)
To: materials-welding@googlegroups.com
Subject: [MW:5170] welding Repair percentage

 
Hi to all,

We are building new booster station ,our contractor wanted to calculate the
repair percentage of the welding based on the linear lenght .Alwyas this
should be calculated by the joint wise .Can any one refere any
international standard that state how to calculate this rate.Please note
that the client specs did not specify any thing on that.

Please send me your thoughts ASAP.

Regards
Soliman


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.


--------------------------------------------------------------------
mail2web.com – Enhanced email for the mobile individual based on Microsoft®
Exchange - http://link.mail2web.com/Personal/EnhancedEmail


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...