Wednesday, May 26, 2010
[MW:5250] Isothermal Annealing in place of normalising & Temperig
Dear All,
One of the vendors is giving Isothermal annealed pipes for pipe material A335 P22, P5 & P9 against our requisition requirement of Normalizing & Tempering.
As per ASTM the same is acceptable.
However, i will like to know the difference in the end product because of this different heat treatment.
Also; if some one can comment on the acceptance of the isothermal annealed pipes in place of normalised & tempered pipes.
Thanks & Regards,
Dhwani Desai
Planning & Piping Dept.
Ext.-7681 --
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
[MW:34866] Presentation for WPS ,PQR AND WPQ as per ASME Sec IX in power point
Dear Experts. If anyone having presentation of WPS,PQR and WPQ as per ASME SEC.IX in power point then please share . Regards Sanja...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment