Thursday, April 15, 2010

Re: [MW:4836] RE: 4826] Worh shop appproval

Prashant

You can concentrate on following quality principal for shop approval:

1.Quality Policy and objectives for the organisation
2.Control of design,drawing 
3.Control of procurement and incomming material
4.Process /fabrication capability
5.Control during processing/fabrication
6.Control of finish product
7.Control of non conformity and their corrective action records for continuious improvement
8.Control of measuring instrument and related calibration process

again this points you can eloborate based on your supplier and critacality of equipments and define quantitative analysis in order to compare with similar item 

Regards

Abhijit

Sent from iPhone

On Apr 14, 2010, at 9:37 PM, <William.Davis@dnv.com> wrote:

 

Is the fabricator supplying the material?

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of prashant pansare
Sent: Wednesday, April 14, 2010 8:38 AM
To: mat wel
Subject: [MW:4826] Worh shop appproval

 

Dear All,
We have to fabricate some structural items of sky walk & for that we r supposed to approve
the fabricator.Items consists of 12" OD X 16mm thk pipes & 6mm to 16 mm thk plates.
 Pl. suggest the key points which r to be checked while shop approval.
Regds,
PSP

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.


**************************************************************************************The contents of this e-mail message and any attachments are confidential and are intended solely for the addressee. If you have received this transmission in error, please immediately notify the sender by return e-mail and delete this message and its attachments. Any unauthorized use, copying or dissemination of this transmission is prohibited. Neither the confidentiality nor the integrity of this message can be vouched for following transmission on the Internet.**************************************************************************************

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...