Tuesday, April 6, 2010

Re: [MW:4715] Other NDT Test

but is ET is not for tube inspection>???

personnel is asking for alternate of hydrotest for shell side

On Tue, Apr 6, 2010 at 10:05 AM, Yadav Shiva <luvshiv2002@gmail.com> wrote:
Dear Pokya,

There is a leak test other than Hydrostatic test on Heat Exchangers. But these possibility depends upon the severity , pressure , flow we can go with Eddy current testing. As the static equipment get eroded heavily(as on Visual Inspection) we can go with Eddy current testing. Depends upon the Client as it is costly to carry out such Inspections.
Since NDT such as DP can be carried out on Tube to Sheet if it is a seal joint.

Regards,
Yadav Shiva Chelliya,
Inspection Engineer,
Doha Qatar,
+974-6166465


On Tue, Apr 6, 2010 at 7:09 AM, pokya tx <pokya84@gmail.com> wrote:
Dear all,

Are there any leak test other than Hydrostatic test to check on Heat Exchanger shell side leaking.

Thanks.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
with Regards


SAQIB JALAL
Inspection Engineer
PakArab Fertilizer Limited
Khanewal Road , Multan
office number +92-61-9061 EXT 3110
mobile number +92-321-4043556

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34913] Filler wire

E71T-1C  is Charpy Impact tested at -20degC E71T-1CJ is Charpy impact tested at -40degC. AWS Classification for FCAW is only a supplementary...