Tuesday, April 6, 2010

Re: [MW:4714] Other NDT Test

Dear Pokya,

There is a leak test other than Hydrostatic test on Heat Exchangers. But these possibility depends upon the severity , pressure , flow we can go with Eddy current testing. As the static equipment get eroded heavily(as on Visual Inspection) we can go with Eddy current testing. Depends upon the Client as it is costly to carry out such Inspections.
Since NDT such as DP can be carried out on Tube to Sheet if it is a seal joint.

Regards,
Yadav Shiva Chelliya,
Inspection Engineer,
Doha Qatar,
+974-6166465

On Tue, Apr 6, 2010 at 7:09 AM, pokya tx <pokya84@gmail.com> wrote:
Dear all,

Are there any leak test other than Hydrostatic test to check on Heat Exchanger shell side leaking.

Thanks.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...