April 18, 2010
You can accept it. Though there is no requirement for copper that is allowed provided all the other required elements are within the SA403 WP316L and your specified limits. Other suppliers will simply not include those elements not required by your specification and they satisfy the spec.
SAVE TREES - THINK BEFORE YOU PRINT
From:
Sent: Sunday, April 18, 2010 5:00 PM
To:
Subject: [MW:4854] Acceptability of MTC.
Hi.
Anybody please advise me on the below,
we have an 12" End Cap (SA403 WP316L)for an ASME job. But in test certificate there is an additional element content (Cu (0,370))is present in the chemical Analysis. please advice me that we can accept this item or not.
Thanks in advance.
SMRUTHI MOHAN
ENGINEER - MATERIALS.
QICL,
| |
--
To post to this group, send email to
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment