Tuesday, April 13, 2010

[MW:4809] Impact requirement for non pressure parts.


Dear all,

Is it required to use Impact tested Welding procedure WPS
( supported by Impact tested PQR) to weld vessel internal Parts?

I.e parts that are directly welded on shell/head(non pressure joints).

Vessel is ASME code stamped, Shell & heads base meterials require impact testing as per code.

can any body give code referances (ASME Sec.VIII Div.1/Div.II.

regards
P.Rao

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...