Monday, April 5, 2010

Fw: [MW:4696] Overlaying / cladding machine


You can contact

"Kevin Kennedy" <Kevin@bortech.com>

"Leo White" <lwhite@bortech.com>,

"Michael Wright" <Michael@bortech.com>

Kevin Kennedy
Product Manager
Bortech Corporation
66 Victoria Street
Keene NH 03431
1-888-265-1202 Toll free
1-603-358-4030 Phone
1-603-358-4007 Fax
kevin@bortech.com
www.bortech.com

regards

P.K

----- Forwarded by Kataiah/BelleliSA on 04/05/2010 10:52 AM -----
"Rakesh" <rakesh_p1@rediffmail.com>
Sent by: materials-welding@googlegroups.com

04/05/2010 09:07 PM
Please respond to materials-welding

       
        To:        <materials-welding@googlegroups.com>
        cc:        
        Subject:        [MW:4695] Overlaying / cladding machine



Hi
I was looking for some information on portable Overlaying / cladding machine for insitu job on nozzles of various dia. Can any body through some light on make / model and avalability
Regards
Rakesh Pandey
Rakesh Pandey,                             Integrity Engineer,                           ADMA OPCO (ADNOC group company).     +971-50-1336971

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

To unsubscribe, reply using "remove me" as the subject.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...