Friday, February 19, 2010

RE: [MW:4346] Design of rectangular tank

ASME VIII APENDIX 13, is for design rectangular tanks.
 
Emilio Cerato

 

Date: Fri, 19 Feb 2010 20:01:08 +0400
Subject: [MW:4345] Design of rectangular tank
From: prabu.mptmt@gmail.com
To: materials-welding@googlegroups.com

 
 Dear Friends,
                     i need a help from yours side, which is i mentioned in below
 
  •  I will give you the details of the problem.
  • Design of Rectangular tank  1500 length x 800 width x1200ht  mm with two different conditions
  • 1. Internal pressure 1 kg/cm2
  • 2. Internal pressure Absolute vacuum
  • Material: MS
  • Medium: Air
 
  • Target- Design the tank with the minimum weight
  • To find: Thickness of the tank, Stiffener size
  • Corrugated type of tank is preferable or not.
 
Could you please send me some documents related to Rectangular tank formulas. Kindly send your answer showing the calculation. I am not familiar with Rectangular tank design.
 
Expecting your reply. Please reply as soon as possible.
 
Thanks in advance.
 
D.Prabhu

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.


Windows Live Hotmail es más seguro con filtro Anti Spam mejorado un 80%. ¡Más info aquí!

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...