Monday, February 15, 2010

Re: [MW:4316] IMPACT TEST IN LOWER TEMPERATURE

E8018 C1
it has nickel which will give high impact values even at -50 degree.

On Mon, Feb 15, 2010 at 12:18 PM, Sudhakar K <sudhaakar.k@gmail.com> wrote:
Hi Ali,
 
As the impact temp is -40 deg C, its 50-50 chances are there, where as if you use E 7016 G in place of E 7018-1, definitely you will get the required values.
Let us know the outcome.
 
rgds
Sudhakar
On Fri, Feb 12, 2010 at 3:01 PM, Ali Asghari <asghariali@rocketmail.com> wrote:
hi all
i have a pwps that the grade of base metal is S355K2G3Z35.now contractor want to test this pwps in -40.
the description of pwps:1-root pass 3.2 dia 7016-1(WITH IMPORTANT ELEMENTS: C=.04,MN=1.10,NI=.02,NB=.01,V=.01,CU=.01)
OTHER passes deposited with 7018-1(WITH IMPORTANT ELEMENTS:C=.08,MN=1.42,NI=.02,NB=.01,V=.01,CU=.05)with different dia:3.2,4,5
does any body have recommendation to get enough toughness(36 kj) in this temp?
regards

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...