Friday, February 5, 2010

RE: [MW:4215] RE: Painting internal of GVC

Dear Friend

 

Thanks for your response.

 

We have very limited details as of now which is reproduced here.

 

The equipment is a gland vent condenser working in deserts of Saudi Arabia with respect to salt laden winds, high humidity sand entrained in vapor streams...this is what may be entering the condenser. Carbon steel tubes are proposed by customer

 

Regards

 

Prashanth Hegde

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Vladimir Augusto Lizama Rojas
Sent: Thursday, February 04, 2010 5:50 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:4210] RE: Painting internal of GVC

 

Dear friend:


What kind of vent condenser do you have?, which is the material of the tubes?, how it will enter sand into the system?... I think you just need to avoid the sand entering into the system, you have to remember that a condenser need is to have a high thermal potential, with a high conduction qualities material, so before protect by painting, you just need to protect the system backwards. Anyway, please give more details to bring you a better answer.

 

Best regards

 

Vladimir Lizama

Civil & Mechanical Engineer



Please don't print this e-mail unless you really need to.
*******************************************************************
This e-mail is confidential. It may also be legally privileged. If you are not the addressee you may not copy, forward, disclose or use any part of it. If you have received this message in error, please delete it and all copies from your system and notify the sender immediately by return e-mail. Internet communications cannot be guaranteed to be timely, secure, error or virus-free. The sender does not accept liability for any errors or omissions.
*******************************************************************
"SAVE PAPER - THINK BEFORE YOU PRINT!"

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...