Friday, February 26, 2010

[MW:4379] RE: 4377] F NO AND A NO FOR ER-309L

F#6 and A#8, P no is applicable only for base material (P#8 for 300 series ASS)

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Arshad Farooq Syed
Sent: Friday, February 26, 2010 10:57 AM
To: materials-welding@googlegroups.com
Subject: [MW:4377] proposed wps

kindly advise me regarding the F NO AND P NO FOR ER-309L
 
Regards

Syed Arshad Farooq 

 QA / QC Engineer

 PROCTER & GAMBLE

 D.L UNIT KARACHI

(+92-21-111-284-284,5378637-40

): +92-308-3067599


By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...