Friday, February 5, 2010

[MW:4217] RE: 4212] IAW with ASME B31.3 for SS304L

Hi Javed,

 

Could you please elaborate your requirements? What do you mean by IAW? Appreciate your response.

 

Thanks.

 

Pradip Goswami

88,Garth Trails Crescent

Hamilton,Ontario, L9B2X1,Canada

Email-pgoswami@sympatico.ca

Email-pgoswami@quickclic.net

Tel-905-679-9677-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Javed Zaidi
Sent: Thursday, February 04, 2010 10:06 AM
To: materials-welding@googlegroups.com
Subject: [MW:4212] IAW with ASME B31.3 for SS304L

 

Does any one have a detail requirement/spec for IAW with ASME B31.3 welding for SS304L piping

 

Javed

 

--

To post to this group, send email to materials-welding@googlegroups.com

To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...