Re: [MW:3977] RE: 3975] Allowable Nozzle Loads on Sulfur Storage tanks,

Sunil Agrawal,   Thanks, but in Appendix-P it is written as it is recommended for tanks larger than 36m in dia. our tank is only 13.6m dia   Regards, Srinivas Sr.Piping Engg. ohm guru namasivaya --- On Wed, 1/6/10, Agrawal Sunil (Mumbai -Stequ) <S.Agrawal@ticb.com> wrote: From: Agrawal Sunil (Mumbai -Stequ) <S.Agrawal@ticb.com> Subject: [MW:3976] RE: 3975] Allowable Nozzle Loads on Sulfur Storage tanks, To: materials-welding@googlegroups.com Date: Wednesday, January 6, 2010, 2:42 PM Please refer API 650 Appendix P   Best Regards, Sunil Agrawal From: materials-welding@googlegroups.com [mailto: materials-welding@googlegroups.com ] On Behalf Of Ohm-Srinivasulu. K Sent: Wednesday, January 06, 2010 10:28 AM To: materials-welding@googlegroups.com Subject: [MW:3975] Allowable Nozzle Loads on Sulfur Storage tanks,   Hi connoisseurs,   We are designing a Sulfur tank (13.6m ID X 14m H), similar to an existing tank, the existing tank doesn't have allowable loads on jackted 4"x6" nozzles, How to calculate the allowable loads, API-650 does not deal with small tanks.   Thanks & Regards, Srinivas Sr.Piping Engg. ohm guru namasivaya   -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.