Re: [MW:3949] Re: Usage of A106 gr. B pipe

Dear Members,

Sorry for not mentioning the design pressure.

It is 5000 PSI. Is it required for the A 106 Gr. B material to undergo impact testing at -29 deg.c, if the MDMT is -29 deg.c and the thickness is 17.12mm Thick.

Thanks,

K.Rajagopal

 

On Sun, Jan 3, 2010 at 2:30 PM, israr <ahmedisrar.nm@gmail.com> wrote:

Yes U can use.

For more detail Ref  Chart Tempreture Vs thickness Ref UCS 66 of asme
section VIII Div.1

Ragards
Israr Ahmed
KSA
+966530417332

On Jan 2, 9:10 am, rajagopal kannan <rajagopal.kan...@gmail.com>
wrote:
> Dear Members,
> Can you please advise whether A 106 Gr. B 4" sch. XXS pipe, be used for MDMT
> -29 Deg.C, as per B 31.3?
> Thanks and Regards,
> K.Rajagopal

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.