Saturday, January 2, 2010

RE: [MW:3940] Metal Composition

Hello, thank you for ur response.

I have done metal analysis of this, and i got the result as EN3 grade. It is a very old bearing housing, and has been worn out. We need to do few microns overlay, so we require grade of electrode to be used.

Regards

Vishal Mehta

Sent from my Nokia phone

-----Original Message-----
From: pgoswami
Sent: 02/01/2010 06:15:05
Subject: RE: [MW:3939] Metal Composition

Hi Mr. Mehta,

Would you please be able to specify the intended use of this steel, e.g
Structural, boiler pressure vessels, offshore piping, or tubular,,,, etc.
The easiest way would be to get the steel analyzed with an Alloy analyzer
(e.g Niton or Others). All alloy analyzers have an in built database of the
nearest matching compositions and the grade of steel, which are built in to
their database.

Once you know the nearest grade , that would be the place to start for
further information e.g Specifications, mechanical properties... etc.

Thanks .

Pradip Goswami, P.Eng
88,Garth Trails Crescent
Hamilton,Ontario, L9B2X1,Canada
Email-pgoswami@sympatico.ca
Email-pgoswami@quickclic.net
Tel-905-679-9677

_____

From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Vishal Mehta
Sent: Thursday, December 24, 2009 3:36 AM
To: materials-welding@googlegroups.com
Subject: [Norton AntiSpam] [MW:3890] Metal Composition

I have the below metal composition. Need to know what grade of steel is it

Carbon: 0.25

Sulphur: 0.021

Phosphorus: 0.028

Manganese 0.85

Silicon: 0.21

Chromium: 0.08

Nickel: 0.11

Moly: 0.02

(all in %)

Please send feedback

Best Regards

VISHAL MEHTA

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...