Monday, January 11, 2010

[MW:4017] RE: 4008] Vibration level for the horizontal centrifugal pump motor

http://cr4.globalspec.com/thread/40168

Please refer site mentioned above.

Instead of Temperature read it with Vibration.

Reasons for High temp. and Vibration are mostly the same.

With regards,

Nilesh Darji
Chief Engineer (Machinery)



Tecnimont ICB House, Chincholi Bunder, 504, Link Road, Malad (W), Mumbai
- 64
Tel : + 91-22-6777 7000 Extn : 7111
E-mail : n.darji@ticb.com
Website : www.ticb.com

CONFIDENTIALITY NOTICE
This e-mail and any attachments there to contain information, which is
confidential, proprietary, privileged and/or protected from disclosure
by intellectual property rights and are intended for the sole use of the
recipient(s) named above. If you are not the intended recipient of this
message you are hereby notified that any dissemination or copying of
this message is strictly prohibited. If you have received this e-mail in
error, please notify the sender either by telephone or by e-mail and
delete it from any computer. Although this e-mail and any attachments
thereto are believed to be free from any virus or other defects, which
might affect any computer or IT system, it is the responsibility of the
recipient to ensure that they are virus free. We are not liable for any
loss or damage arising in any way from receipt or use there of. Thank
you.

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of rutvik dixit
Sent: Sunday, January 10, 2010 8:36 PM
To: materials-welding@googlegroups.com
Subject: [MW:4008] Vibration level for the horizontal centrifugal pump
motor

Dear All,
It has been noticed during performance test of horizontal centrifugal
pump that vibration of motor coupled with pump casing with the help of
shaft exceeds the applicable acceptance criteria given by my client.
Manufacturer argues that the vibration level of motor will be higher if
motor coupled with the casing. My question is that vibration level of
motor to be used with pump casing should be checked in decoupling(motor
alone) condition or with coupled condition(Casing+motor)?
This is AC motor of 45kw.

With Regards,
Rutvik


The INTERNET now has a personality. YOURS! See your Yahoo!
Homepage. http://in.yahoo.com/

Filtered by Hosted Filtering

No comments:

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...