Wednesday, January 6, 2010

[MW:3976] RE: 3975] Allowable Nozzle Loads on Sulfur Storage tanks,

Please refer API 650 Appendix P

 

Best Regards,

Sunil Agrawal

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Ohm-Srinivasulu. K
Sent: Wednesday, January 06, 2010 10:28 AM
To: materials-welding@googlegroups.com
Subject: [MW:3975] Allowable Nozzle Loads on Sulfur Storage tanks,

 

Hi connoisseurs,

 

We are designing a Sulfur tank (13.6m ID X 14m H), similar to an existing tank, the existing

tank doesn't have allowable loads on jackted 4"x6" nozzles, How to calculate the allowable

loads, API-650 does not deal with small tanks.

 

Thanks & Regards,

Srinivas

Sr.Piping Engg.



ohm guru namasivaya

 


By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:34913] Filler wire

E71T-1C  is Charpy Impact tested at -20degC E71T-1CJ is Charpy impact tested at -40degC. AWS Classification for FCAW is only a supplementary...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...