Monday, January 4, 2010

[MW:3958] Design of spacer & blanks as per EN 13480

Hello All,

Can anybody guide me for  spacer and blank, blinds design according to EN 13480-part 3 ?

Which design clause is applicable for Spacer and blanks, blinds thickness calculation ?
The formula according to 7.2.4-4 from EN13480-3 gives  very high value in comparison to ASME 31.3 clause 304.5.3.

please advice me about which clause of EN shall be use for calculation of spacer and blank thickness as per EN norms.


Kind regards

Rahul Pisat

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34866] Presentation for WPS ,PQR AND WPQ as per ASME Sec IX in power point

Dear Experts.        If anyone having presentation of WPS,PQR and WPQ  as per ASME  SEC.IX  in power point then please share . Regards Sanja...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...