Monday, December 14, 2009

Re: [MW:3827] RT Requirments

hi palani
 
What is the design pressure? test pressure? What is the Size? Normally for Instrument Air lineRT10% & PT100% will be followed unless otherwise its specified. Pl chcek the project NDE requirement.
 
S.Sekar
QA/QC Engineer
Samsung C&T
Singapore.

On Mon, Dec 14, 2009 at 11:46 AM, P. PALANIVEL <p.palanivel@gmail.com> wrote:
Dear Friends Good DAY,
 
Can any one help for the below quiery,
 
A requirement for to replace Pnuematic test in palce of Hydro test for Instrument Air line.  Already there is a requirment of 10% Radiography of the line. What will be the RT required % if Pnumetaic test is carried out.
 
Pl. also let us know where may the requirment is given in CODEs or any other Project spec.
 
 

Thanks & Regards,

 

Palanivel.P

Quality Superintendent.

CAIRN INDIA,

Barmer, Rajasthan - 344 001. India.

Mobile   :   +91 90018 94547 & +91 97904 00797.

E Mail    :    p.palanivel@cairnindia.com

                     www.cairnindia.com

 

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...