Monday, December 14, 2009

[MW:3835] SA387 Gr.11 Cl.2 material welding.


Dear all,

Can any body have experiance on welding of SA387 Gr.11 Cl.2 (1 1/4Cr-1/5 Mo)material with E8018-B3L, ER80S-B3L, EB3 type welding consumables(2 1/4 Cr-1Mo).

Higher composition consumables (B3L) are recommended?

Is there any change in PWHT is required as compared to standard PWHT cycle for SA387 Gr.11 Cl.2 material as per ASME Div.1.

Pl. share experiance on welding of subject material.

( Design Code : ASME div.1
MDMT : 0 Deg.C
Impact : 50/40)

regards

P.Rao





--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...