Wednesday, November 25, 2009

Re: [MW:3728] NDT procedure qualification

"YES" It is mandatory to demonstrate the Procedure qualification before applying on the actual job, else how will we ensure that what is performed gives you correct results by the method it is being done.
Regarding the code/standards, reference depends upon the requirement of the specific project/client acceptance.
 
Regards
 
J.N.Murthy

 
On 11/24/09, K.M Hrishikesan <hrishikm07@gmail.com> wrote:
Is it mandatory to demonstrate NDT procedure qualification before applying in the actual job? If so, please give the code/standard reference.
 
Regards
Hrishi

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...