Saturday, November 21, 2009

Re: [MW:3707] Laser wire

Jeff,
Please indicate which filler metals are of interest.
For instance, we are able to offer well over 200 various alloys in
straightened and cut lengths, flag-tagged for traceability, in smaller
packs, with release to AMS, AWS, MSRR, etc and with certification. All used
for manual GTAW applications and with cleaned wire surface, Mainly used for
gas turbine applications although also used for tool repair using mini-laser
heat sources. Ultra fine diameter filler wires can be offered for many of
these welding alloys and in shorter lengths
see; www.vbcgroup.com
cheers,
Dave Harvey, 21 11 09


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...