Thursday, November 19, 2009

Re: [MW:3689] Tolerance for Pitting of plates

Hi,
 
There is no std giving about the pitting tolerence.
 
If you refer the ABS Modu Code Part 2 (Page 12 ), they given the under tolerence for the thickness.
 
Upto 0.3mm is allowed on new plates for the certification purposes.
 
Which can be applied for the pittings as well.
 
Since the ultimate effect of the pittings is the thickness reduction , 0.3 mm shall be applicable to pittings as well(Irrespective of what grade material)
 


 
On Wed, Nov 18, 2009 at 4:00 PM, Mrityunjay Kumar / ZS Saudi PEB QA/QC <Mrityunjaykumar@zamilsteel.com> wrote:

Dear all,

Can any body guide or send me the tolerance for pitting of plates (ASTM A572M Gr-50)?

Quick reply will be highly appreciated.

 

 

 Thanks and Regards,

M.K.Choudhary

     

      PEB - QA/QC

P.O. Box 877, Dammam 31421

Kingdom of Saudi Arabia

'   +966 38471840 Ext- 555

7    +966 38471840 Ext-559

ý   www.zamilsteel.com

--------------------------------------------------------------------------------------------------------
Disclaimer: This email and any files transmitted with it are confidential
and intended solely for the use of the addressee(s) named herein. If you
are not the intended recipient or addressee, you should not use, disseminate,
distribute, copy or alter this email. Any views or opinions presented in this
email are solely those of the author and might not represent those of "Zamil
Industrial" and or its units.

Warning: Although reasonable precautions have been taken to ensure no viruses
are present in this email, the company cannot accept responsibility for any
loss or damage arising from the use of this email or attachments. If you have
received this electronic mail message in error, please contact the sender directly.

--
To post to this group, send email to
materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
Thanks & regards,

K.Babu
Welding Engineer,
PPL Shipyard Pte Ltd
Singapore
HP:  +65 94815990
Skype: psgbabu

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...