Friday, November 6, 2009

[MW:3602] RE: 3601] Re: material selection

But what about the sizes below 8 and less! Is Rubber coating still possible or not! And the constructability issue at site?  One of the client in ongoing project of our company has given the requirement of Titanium materials upto 4 and CS Glass flake Resin lined above 4 for sea water only.

Regards

Bagesh.

 


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of ANANT ONKAR
Sent: Friday, November 06, 2009 5:16 PM
To: materials-welding@googlegroups.com
Subject: [MW:3601] Re: material selection

 

Dear Kannan,
                  Better to go for CS pipes with Rubber coating . We are master for such jobs .
Regards
Anant
Ocean Rubber Factory Shj. UAE
 
> Date: Thu, 5 Nov 2009 05:52:29 -0800
> Subject: [MW:3597] Re: material selection
> From: kannan_cit@yahoo.com
> To: materials-welding@googlegroups.com
>
>
> For water service there is a good reference of collection of papers,
> from NACE titled Guide to the use materials in waters by Michael
> Davies and PJB Scott.
>
> Personally, from a material engineer perspective, I would advice a Cu-
> Ni alloy (C70600) which is widely used, if the size is smaller. If
> sizes are larger RTPR with preferable Polyester resin, if not with
> Epoxy would be cost effective and suit the need.
>
> Regards,
> Kannan
>
> On Oct 7, 12:06 pm, Ali Asghari <asghari...@rocketmail.com> wrote:
> > dear all
> > what is the best material can be replaced with duplex(1.4462) that have a good properties in sea water & good resistances to pitting & S.C.C?
> > does anybody know or have informations or books for material selection?
> > regards
> </html


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...