Sunday, October 11, 2009

[MW:3477] Re: Grain size

If the requirement is fine grain steel then the grain size shall be 7 or higher.




2009/10/10 Shashank Vagal <nach_sam@yahoo.com>
Senthil,
It should be in the MTR. But a fine grain size starts from 6 up.
Shashank

--- On Sat, 10/10/09, MNS <mn.senthilkumar@ymail.com> wrote:

From: MNS <mn.senthilkumar@ymail.com>
Subject: [MW:3469] Grain size
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Saturday, 10 October, 2009, 9:41 AM


May I know the Grain size of SA 516 Gr 70?


Thanks
Senthil


Now, send attachments up to 25MB with Yahoo! India Mail. Learn how





--
C. K. Purohit
Eng-Tech Weld1
Sr Welding Inspector


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...