Monday, October 5, 2009

[MW:3421] Re: Welding consumables certification

Hi,
 
Here's the difference
 
EN 10204 2.2 - Test report of Conformation of compliance with the order, with non specific test results and signed by manufacturer.
EN 10204 3.1 - Inspection certificate of Conformation of compliance with the order, with specific test results and signed by designated Quality personnel of the manufacturer independent of the production department.
Regards
Hrishi
On Mon, Oct 5, 2009 at 4:19 PM, ELAMARAN RAJAN <elams.rajan@gmail.com> wrote:
Dear Friends
 
As per our client specification for all welding consumables has to be minimum of EN10204 3.1 certification is required.
we are submitted EN10204 3.1 Chemical composition and for mechanical properties EN10204 2.2.
But Client not accepting that certificate due to mechanical properties has to be certified as per EN10204 3.1
 
let me know what is the difference between EN10204 3.1 and EN10204 2.2

regards
maran




--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...