Austenitic weld metal having C max 0.1% for MDMT colder than -101 °C, and C > 0.1% for MDMT colder than -48 °C with consumables used from SFA 5.4, 5.9 are exempted from CVN impact.
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of amarjit Singh
Sent: Wednesday, September 16, 2009 3:02 PM
To: materials-welding@googlegroups.com
Subject: [MW:3227] Re: wps for ss to ltcs
As per ASME
1) if material to be used in production has same Pno & group no,then yes you can use..
2) if the P no is same & not group no then you have to qualify the supplimentory procedure for impact & use both the PQR for making the WPS
Amarjit singh
On Tue, Sep 15, 2009 at 7:01 PM, rajan elamaran <elams20@yahoo.com> wrote:
Dear frds I have a approved wps for ss to cs It is agreed to use for the same wps for ss to LTCS regards RE |
Now, send attachments up to 25MB with Yahoo! India Mail. Learn how
--
Amarjit Singh
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
No comments:
Post a Comment