Monday, September 14, 2009

[MW:3188] Re: Ferrite limits

3 (minimum) to 7 % (max) or 4 ( min) to 6% (max) depending on the
application ( Nuclear Reactors applications)
Regards,
Vaidehi Ganesan.
--------------------------------------------------------------------------------------------------------------------------------
----- Original Message -----
From: "ma" <azizi-m@pidec.com>
To: "Materials & Welding" <materials-welding@googlegroups.com>
Sent: Sun, Sep 13, 09 5:28
Subject: [MW:3185] Ferrite limits


>
> Hi every body
> what is the acceptable criteria of Ferrite phase during the Stainless
> Steel weding?
>
> Thanks
> MA
>
>

--------------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.95/2368 - Release Date: 09/13/09
17:50:00


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...