I seak advise on how to calibrate the normal Ultrasonic Thickness metering
device to measure the thickness of C.S. Vessels and piping with clad or
overlay while they are in service (on stream inspection). The required
accuracy of reading is 1 mm Max.
Save a tree...please don't print this e-mail unless you really need to.
This email and any attached files ("Message") may contain confidential and/or privileged information. It is intended solely for the addressee(s). If you receive this Message in error, inform the sender by reply email, delete the Message and destroy any printed copy.
Any unauthorized use, distribution, or copying of this Message or any part thereof is prohibited. Emails are susceptible to alteration. Neither Technip nor any of its affiliates shall be liable for the Message if altered or falsified nor shall they be liable for any damage caused by any virus that might be transmitted with this Message.
To post to this group, send email to firstname.lastname@example.org
To unsubscribe from this group, send email to email@example.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.